Loxeal Threadsealant 58-11 (Gas & Water) 10 x 100ml tubes

Loxeal 58-11 High Pressure Thread Sealant 3.38oz

Bromic 2.2L Nitrogen Mix Cylinder

Bromic 2.2L Nitrogen Gas Cylinder

Loxeal 18-10 Medium Pressure Thread Sealant 3.38oz

The Loxeal 18-10 Medium Pressure Thread Sealant 3.38oz is an anaerobic P.T.F.E. modified adhesive that is ideal for the sealing of pipe fittings and coarse thread joints.

Ideal for sealing threaded joints against gas

  • Rapid cure time and easy application
  • High viscosity – once oxygen is expelled from sealant it will activate and start to cure
  • Sealing unaffected by shock/vibration within temperature range: 50°F to 302°F
  • AGA-approved
  • Not suitable for use on plastics
  • Non-Toxic
  • Made in Italy
  • Available in 3.38 oz and 8.4 oz tube
In stock
  • Flashpoint Approximately 212°F
  • *Approved to 500 kPa

More Specification details in specification tab

More Information
SKU 7170183
Weight 0.2866
Application Kitchen, Laundry, Bathroom
For use with LPG (Propane), NG
Barcode N/A
Pack Quantity 10
Retail Packaging Yes
Pressure Rating (kPa) AGA approved to AS 4623:2008 - Class II (500kPa), Approved by Loxeal s.r.l to 1,050 kPa
Working Temp. Range (°C) 50°F to 302°F
No. of Tubes x Size (ml) 10 x 3.38oz tubes
Composition Anaerobic Methacrylate & P.T.F.E.
Colour Yellow
Viscosity (25°C - mPa.5) ≈45000 mPa s @ 77°F Thixotropic
Density (25°C - gr/ml) 1.0
Max. Diameter of thread/gap filling M 80 / 0.30mm
Flash Point (°C) Approximately 212°F
Solvent Content None
Shelf Life in Years (when stored at 23°C) 2
Handling Cure Time 20 - 40 minutes
Functional Cure Time 1-3 hours
Full Cure Time 5-10 hours
Shear Strength 4-6 N/mm²
Locking Torque (breakaway & prevailing) 1.5 - 2.5 N/mm² & 1.0 - 1.5 N/mm²
Elongation at Break More than 100%
AGA Approval No. 5047
Sealant/Lubricant Type Sealants
Brand Loxeal
We found other products you might like!